Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Car Racks

Yakima 12mm Fork Adapter
$59.00
The 12 x 100 mm thru-axle adapter allows modern road bikes to quickly secure to any traditional 9 mm fork mount bike tray. A simple thru-axle adapter that allows modern road bikes to quickly secure to any fork-mount bike rack. - 12mm x 100mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
Yakima CrossBars
$105.00
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Yakima Fork Adapter
$59.00
Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.
Yakima FrontLoader
$209.00
The FrontLoader is one of Yakima's most versatile upright mount roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It easily handles wheel sizes from 20 inches, to 700c road wheels, to large 29er mountain bike tires. Even if your bike has a unique frame design, there will be no problems carrying it because the FrontLoader holds the wheels and not the frame. Plus, it won't scratch your paint!
Yakima Q Clip
$34.99 - $50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Yakima Q-Towers (4-pack)
$150.00
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima TubeTop
$54.99
Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts. This Item may be in stock with Black accents or with Red, but both use the same part numbers. Please contact us to confirm the color of product in stock.
Kuat Beta Hitch Rack
$195.00
Kuat's Beta is a lean, mean rack that carries two bikes (up to 80 lbs. total capacity) and weighs in at just under 14 lbs. - Carries 2 bikes (up to 40 lbs. each) - Total carrying capacity of up to 80 lbs. - Folds up quickly for storage - Tilts down for easy vehicle access - Enhance the Beta with hitch lock system (sold separately) - Hand-tight cam system - no need for additional tools! - Anti-sway carriages for a smooth ride - Aluminum construction is lightweight and extremely durable - Gun Metal Gray powder coat finish - 2-inch weighs only 12 lbs. (lightest weight on the market) - 1.25-inch weighs only 14 lbs. (additional 2lbs due to steel lower end) - Available for 2-inch OR 1.25-inch receivers. The 1.25-inch Beta can fit either hitch size with the 1.25-inch to 2-inch adapter.
Kuat Sherpa
$449.00
Kuat's Sherpa is a lightweight tray-style hitch rack that comes in at a touch under 30 pounds so you can install it with ease. It also packs the durability, ease-of-use, and thoughtful features that Kuat is known for. This two-bike rack features a spring-loaded lever for tilting the rack into position, a hand-tight anti-wobble cam system, and a locking hitch pin and external cable lock. Simple, durable, and secure. Features • Carries 2 bikes (up to 40 lbs. each) • Total carrying capacity of up to 80 lbs. • Folds up quickly for storage • Tilts down for easy vehicle access • External cable lock and hitch pin included • Front and rear tire ratchets make loading and unloading a breeze • Hand-tight cam system - no need for additional tools! Specs • Weighs 29 lbs. assembled • Accommodates up to a 44.5" wheelbase • Fits 20" - 29" wheels • Accommodates 2" AND 1.25" receiver options • Fits up to 2.75" tire
Hollywood Racks Bike Adapter Pro
$39.99
Having trouble getting your non-traditional bike onto your trunk or hitch rack? Struggle no more with Hollywood's Bike Adapter Pro. It quickly attaches to most bikes to form a top tube and makes it easier than ever to safely and securely attach it to your rear rack.
Hollywood Racks Spare-Tire Rack
$159.99
Maximize your off-road exploring with Hollywood's Spare-Tire Rack! This smart rack carries 2 bikes, is fully adjustable to fit most rear spare tires, and boasts a rugged and simple strap design that holds fast and allows speedy installation and removal. Plus, the rack's support arms can be centered for off-center-mounted tires and folded down when not in use. The Spare Tire Rack comes fully assembled, too. - Distance between bike support arms: 13-inch - Distance between bike cradles: 7-inch - Maximum tire width 12-inch
Yakima 15mm x 110 Fork Adapter
$59.00
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount. PRODUCT DETAILS - 15mm x 110mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
Yakima BaseClip
$64.99
Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima BaseClip 191
$63.00
Tailor your towers - these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car's naked roof.
Yakima BedHead
$79.00
Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.
Yakima BedRock HD
$240.00
Sleek and strong, the BedRock HD’s low profile delivers a 300-lb. on-road capacity and Yakima's exclusive new Off-Road Rating for up to 180 lbs. all without the need to drill into the truck bed. Pair it with the HD Bar length that best fits the bed to carry bikes, skis, cargo boxes or the SkyRise Rooftop Tent all while preserving valuable cooler-carrying capacity underneath (HD Bar sold separately). This powerhouse truck rack provides strength and security, easily-accessible tie-down points, and T-slot attachment capability that makes adding gear easy. Product Details: - Easy to reach low profile height position makes it easy to rack out and reach gear - Comes with four towers - Requires Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately) - Simple, tool-free attachment makes installation, removal and crossbar spread adjustments a breeze - Best-in-class, maximum on-road rating of 300 lbs. - Maximum off-road rating of 180 lbs. - Built to last, with engineered aluminum construction and durable powder-coat finish - Integrated tie-down points on end-caps of HD Bar make securing any load quick and simple - T-slot attachments make adding gear mounts and accessories fast and easy - Designed and tested for all common truck beds - Integrated SKS (Same Key System) locks the rack system to the truck bed - Suggested mounts and accessories: Bike Mounts, Cargo Baskets, SkyRise Tent, Wear Strips, Eye Bolts, BigCatch Fishing Kayak Saddles Product Specs: - Weight: 8.01 lbs - Dimensions: L 5.50in x W 4.25in x H 7.00in - Some assembly required, 30 minute install
Yakima BlockHead
$39.00
When you've got a tough racking dilemma, what you really need is Yakima's BlockHead. This handy device securely holds your bike by the fork with a rugged, 9mm-diameter skewer. The BlockHead is made of anodized aluminum and bolts to your pickup, RV or practically anywhere (use your imagination for hundreds of other bike-storage possibilities).
Yakima Bolt Toploader Brackets
$59.00
Yakima's Bolt Toploader Brackets are permanently mounted brackets that allow Yakima 1A Raingutter Towers or Q Towers to be used in some situations where your car doesn't have rain gutters (towers sold separately).
Yakima CoreBar EndCaps
$4.40
Pair of EndCaps for Yakima CoreBar.
Yakima Corebar
$165.00 - $185.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Yakima Evenkeel
$119.00
Be the envy of all the boaters at the river with the EvenKeel's ingenious and thrifty saddle-style rooftop rack. Universal mounts fit nearly any crossbar right out of the box. And out of the box it comes with everything you need to haul your boat, including straps and bow/stern tie-downs. Sold in a set of 4.
Yakima Fat Bike QR Locking Skewer
$39.00
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
Yakima FatCat EVO 6
$309.00
The FatCat EVO is Yakima's sleekest, quietest, and sweetest ski and snowboard mount. It is wide enough to carry six pairs of powder skis – up to 136mm at the tip – or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The HangOver clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security.
Yakima ForkChop
$159.00
- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity
Yakima FreshTrack 4 Ski and Snowboard Mount
$199.00
NEW! Perfect for family weekends or ditching work on a powder day, FreshTrack 4 is made for loading up and finding first tracks. Wide enough for a couple of boards or four pairs of skis, simple to mount on virtually any roof rack, no tools needed, and super easy to use, it's great for fresh powder and blue groomers. One-button access allows gloves-on operation, and the built-in SKS locks secure your gear. Product Details - Easily carries four pairs of skis up to 120mm wide at the tip or two snowboards - Tool-free clamp design makes install and removal a breeze - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Includes SkiLift attachment to provide clearance for tall bindings - Integrated SKS (Same Key System) locks included for added security Product Specs - Weight: 7.94 lbs - Dimensions: L 25.25" x W 5.75" x H 7.25" Installation Details - Some assembly required - Tool-Free Install - 25 minute install
Yakima FreshTrack 6 Ski and Snowboard Mount
$239.00
NEW! Blue groomers and fresh powder, the FreshTrack 6 is the perfect mount for loading the crew and finding first tracks. Wide enough for four boards or six pairs of skis, simple to mount on virtually any roof rack, no tools needed, and super easy to use, it's great for quick getaways and dawn patrol starts. One-button access allows gloves-on operation, and the built-in SKS locks secure your gear. Product Details - Easily carries six pairs of skis up to 120mm wide at the tip - or four snowboards - Tool-free clamp design makes install and removal a breeze - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Includes SkiLift attachment to provide clearance for tall bindings - Integrated SKS (Same Key System) locks included for added security Product Specs - Weight: 9.90 lbs - Dimensions: L 35.00" x W 5.75" x H 7.25" Installation Details - Some Assembly Required - Tool-Free Install - 25 Minute Install
Yakima HD Bar
$249.00
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups
Yakima HD Bar SL Adapter
$30.00
The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up. - Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four. - Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only. - Weight: 0.42 lbs - Dimensions: L 1.75in x W 1.50in x H 1.00in - No Assembly Required
Yakima HitchSki
$249.00
Yakima's HitchSki is an attachment for your hitch-mounted rack (sold separately) that enables you to carry skis and snowboards. Simply swap the HitchSki for your bike attachment and you now have a rack that can be used year-round. It hauls up to six pairs of skis or four snowboards without the risk of damage thanks to rubber-padded arms. And, Yakima's SKS locks are included to prevent theft.
Yakima Jetstream Bar
$219.00
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
Page 1 of 12 Next page