Parts & Accessories

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.

90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.

In a world where aluminum is used to replace brass for cost, and plastic is used to replace aluminum for cost, and so on, we felt the need to re-imagine this most iconic of cycling tools as an heirloom-quality objet d'art. The utmost care has been taken to machine the part using mono-crystalline diamond tooling to get the perfect surface finish, while the final feel of the part benefits from an investigation into more than 20 different styles and depths of knurl so that it will feel 'just-so' in your hands as it provides a lifetime of useful enjoyment. This is truly a tool you will hand down to your children and them in turn onto theirs. The Iconic SILCA Presta Only Head (formerly the 30.0) has been updated during its transition to American production. The highly efficient push-on design securely seals on Presta valves with no levers or buttons to operate. - Iconic Silca Presta Head Design: in use by more pro team and shop mechanics than any other! - 17-4 Stainless Material, 6X the strength and 2X the hardness of Brass - Full Synthetic Elastomer 242 Gasket with 5X the durability of traditional rubber materials - Pressure-amplifying dome geometry uses air pressure to clamp the valve stem - Schrader valve thread on hose side threads into any Schrader compatible hose attachment

Smaller Head fits every known Disc wheel made. Includes Prestacycle's newest version of the Mini Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

Lezyne's ABS Pen Gauge is a replacement flex hose with an integrated, in-line psi/bar pressure gauge with easy to read markings. It is stored inside the handle of Flex Hose equipped Lezyne hand pumps (Medium and Large sizes only, sold separately), and is equipped with the ABS Flip Thread Chuck which threads onto Presta and Schrader valves for a secure connection.

Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.

Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.

Replacement ABS Flip Thread Chuck for all Lezyne High-Pressure Floor Drive floor pumps and all Micro Floor Drive hand pumps.

Replacement or upgrade for the Micro Floor Drive Pump. ABS chuck and inline pen gauge. Compatible with all Micro Floor Drive Pumps.

Lezyne's Slip Chuck is the perfect solution for getting to those hard-to-reach valve stems, especially on disc wheels. It's precision-machined from aluminum and is designed to fit Presta valves on deep-dish carbon disc wheels.

Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.

Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure. Specs - PUMP HEAD COMPATIBILITY: Presta / Schrader pumps - TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves - GAUGE: Digital, 300 psi / 20.7 bar - UNIT: psi, bar, kg / cm2 - BATTERY: CR2032 x 1 (included) - THUMB LOCK: Aluminum - PRESSURE TUNING: Air release button - BODY: Aluminum / Engineering grade polymer - SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7” - WEIGHT: 102 g / 3.60 oz Added Features: - Rotatable head / gauge - Auto-off function

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

Topeak's incredibly compact CNC aluminum Threadlock Upgrade Kit threads directly to Presta or Schrader Valves with no need to change internal parts or use extra adapters. It fits most rubber pump hoses, and is compatible with Topeak JoeBlow Ace, JoeBlow Mountian, JoeBlow Sport II, JoeBlow Max II and JoeBlow Max HP.

- Ball-inflating needle for footballs, basketballs and more

Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.

• Secures frame pump to frame • Nylon • Also good for use as a watch band

- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm

Replaces worn end on any pump hose. - Head Type: Schrader

• Presta and Schrader valve compatible head • Hose and head kit fits most floor pumps

Replacement for Air Tool Pro Pump handle.